PCIPROTO - PCI Prototype Card with PCI Decoder chip

Plug and Play PCI board with PCI decoder chip
PCI Chip is separately orderable and available ( QLIB Driver Library included )
I/O Mode and Memory Mode
Fast Realtime Interface
CD-ROM contains Software for Windows XP / 2000 / NT 4.x, ME / 98 / 95
Large onboard soldering area for additional components
Up to 32 I/O ports decoded
Signals on board: IORD, IOWR, IRQ, A2 - A7, D0 - D31, RST ( PC Reset ), PCICLK, CLKOSC, + 3.3V, + 5 V, +12 V and -12 V,
Contacts are gold plated

Prix: 204,14 Euro

The PCIPROTO card is especially useful for the development of PCI prototype boards. The board is supported by the QLIB (QUANCOM Driver Library), and therefore allows an easy programming under Windows XP, 2000, NT 4.0, 95, 3.11, HP-Vee and LabView. The board supports I/O and memory mode and can be used for rapid building of all types of prototypes. The PCI decoder chip is separately available and includes a license for the QLIB ( QUANCOM Driver Library ) which allows the access under various operting systems.

données techniques
•Généralités	data bus: D0...D31 address bus: A0...A4 control bus: RD, WR for controlling the data direction, RESET (reset by PC) INT (interrupt request), CLKX (500Hz), OSCILL (clock local quartz) freeing signals: for 256 I/O addresses, CS0..3 supply voltage: +5 V, +12 V, -12 V

•addresses E/S	PCI

•Connecteurs carte	40pin Connector, Prototyping area

•Connecteurs support	37pin D-Sub Connector (female)

•CE	Ja

•Interrupteurs	Ja

•Temperature	0...70 °C

Documentations
	Manual_english_PCIPROTO [Téléchargment 2,2MB]

Example-projects
	Example for Visual-Basic [Téléchargment 8,1KB]

	Example for writing and reading of the hardware-register in Visual-Basic [Téléchargment 14,1KB]

	Example for programming in the memory-mode in C/C++ [Téléchargment 17,5KB]

Produits optionnels
•PAR-KL-37	Bornes à cable pour D-Sub sur bornes à vis, D-Sub 37 poles.

•KAB-DSUB-37	cable confectionné D-SUB à 37 poles.

... back to home

Mis à jour le 26.2.2008 par Jürgen Siebert