PCIOPTO16IO/LC - PCI Opto I/O Card (16 Inputs + 16 Outputs)

16 Opto isolated inputs ( 0...30V ) and 16 Opto isolated outputs
32 LED for optical function control ( display the state of all inputs and outputs )
Easy connection of external circuits by PAR-KL-68 - Terminal block
Examples for Visual-Studio .NET, Visual Basic, Visual C/C++, Borland, Agilent Vee, Labview, Sun Java and others

Prix: 280,84 Euro

Ce produit n'est malheureusement plus livrable. Ils peuvent toutefois se décharger conducteurs et manuels encore mis à jour de ce Webseiter et prendre contact avec nous avec des questions techniques.

Alternatif ou successeurs:

PCIOPTO16IO PCI Opto-card (16 In + 16 Out)

The PCIOPTO16IO/LC opto board has 16 inputs and 16 outputs and is designed for industrial purposes. It is the low cost variant of the PCIOPTO16IO which has some additional security features.

Optocouplers protecting the inputs and outputs up to 500 Volts
All inputs and outputs are protected by optocouplers. This ensures protection for your personal computer in heavy electrically polluted environment. These optocouplers are designed as AC-optocouplers which means that the polarity of the input signal makes no difference. Also all the inputs have no common ground, so that each of the inputs signals may have a different ground-signal. If you want to have an input range from 5V to 12V you may tell us with your order. The default input range is 12V to 30V.

Software library

VB PCIOPTO16IO/LC example
The PCIOPTO16IO/LC example shows the programming with Visual Basic
You need no knowledge in the driver development. We implemented an command set which is the same for all operating systems. An application that controls the PCIOPTO16IO/LC, and which is generated for Windows 98 can be used directly on a Windows XP PC.

With the QLIB it is easy to create applications with Visual-Studio .NET, Visual-Basic, Borland Delphi or other modern compilers. Even an interface to MS Excel, MS Access or Sun Java is available. We included the VB PCIOPTO16IO Sample which shows how to program and test the card and it also includes the source code. This is a good starting point for your own applications.

The QLIB is a API which provides it's functions through a Windows DLL, so it is possible to use QLIB with all applications that allow access to external DLL Functions.

The PCIOPTO16IO/LC is also available with optocoupler outputs as PCIOPTO16IO , PCIOPTOREL16 ,as USB module USBOPTOREL16 , and as ISA card OPTOREL16

données techniques
•Généralités	Supply voltages: GND / +5 V from 68pin. HD-D-Sub-socket

•Entrées	nput: 16 channel opto-isolated (12V...30V) Optional : 5V...12V Input Flip-Flops to buffer a change for each channel (16 Flip Flops available)

•Sorties	Output: 16 opto-isolated, no common ground Switching current: max. 100 mA per channel Switching voltage: 0...30 V

•addresses E/S	PCI

•Connecteurs support	68pin HD-D-Sub-Connector (female)

•CE	Ja

•Base temps interne	8 MHz

•Temperature	0...70 °C

Documentations
	Manual_english_PCIOPTOREL16_PCIOPTO16IO [Téléchargment 5,7MB]

Example-projects
	Example for reading of the digital inputs in Borland Builder [Téléchargment 449,4KB]

	Example for writing to the digital outputs in Borland Builder [Téléchargment 449,3KB]

	Example for writing to the digital outputs in Visual C# .NET [Téléchargment 14,3KB]

	Example for writing to the digital outputs in Delphi [Téléchargment 6,6KB]

	Example for reading of the digital inputs in Delphi [Téléchargment 6,5KB]

	Example for reading of the digital inputs in Delphi [Téléchargment 19KB]

	Example for writing to the digital outputs in Delphi [Téléchargment 19KB]

	Example for reading of the digital inputs in Java [Téléchargment 1,7KB]

	Example for writing to the digital outputs in Java [Téléchargment 1,7KB]

	Example for including in Labview [Téléchargment 22,3KB]

	Example for reading of the digital inputs in LabWindows / CVI [Téléchargment 21,1KB]

	Example for writing to the digital outputs in LabWindows / CVI [Téléchargment 21,5KB]

	Example for writing to the digital outputs in Visual-Basic [Téléchargment 14,7KB]

	Example for writing and reading of the hardware-register in Visual-Basic [Téléchargment 14,1KB]

	Example for reading of the digital inputs in Visual Basic [Téléchargment 14,7KB]

	Example for reading of the digital inputs in Visual Basic.net [Téléchargment 16,8KB]

	Example for writing to the digital outputs in Visual-Basic.net [Téléchargment 16,3KB]

	Example for programming in the memory-mode in C/C++ [Téléchargment 17,5KB]

	Example for reading of the digital inputs in C/C++ [Téléchargment 30,7KB]

	Example for writing to the digital outputs in C/C++ [Téléchargment 26,5KB]

	Example for reading of the digital inputs in Visual C++ .NET [Téléchargment 0,2KB]

	Example for writing to the digital outputs in Visual C++ .NET [Téléchargment 0,2KB]

Produits optionnels
•KAB-DSUB-68	HD-D-SUB cable 68 pin

•PAR-KL-68	Terminal Block for 68 pin D-Sub Cable with c-clamps

•SEN-DREH1	Revolution sensor

•SEN-OBJ1	Object sensor

... back to home

Mis à jour le 23.5.2006 par Jürgen Siebert